The screen position variable ranges depend on the View Mode or the signal type. (Last memory))Īlthough it can choose now, it is toggle operation in inside. Problem response (communication error or incorrect command)Ĭommands not indicated here are not guaranteed to operate. ![]() Parameter 4-digits: Parameter 0–9, x, blank, ? When “?” is input for some commands, the present setting value responds.Ĭommand 4-digits: Command. (Refer to “Response code format”.) Any numerical value can replace the “x” on the table. (Be sure that 4 values are input for the parameter.) When the input parameter is not within an adjustable range, “ERR” returns. Input the parameter values, aligning left, and fi ll with blank(s) for the remainder. Wait until the PC receives the OK response before sending the next command. Do not send multiple commands at the same time. The TV operates according to the received command and sends a response message to the PC. Send the control commands from the PC via the RS- 232C connector. The TV's communication settings are as follows: ![]() Set the RS-232C communication settings on the PC to match the TV's communication conditions. This operation system should be used by a person who is accustomed to using computers. Attach an RS-232C cable cross-type (commerciallyĪvailable) to the supplied Din/D-Sub RS-232C for the connections.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |